Station Freezes when employee clocks out

Station Freezes when employee clocks out

ISSUE: Station freezes after employee clock out

1) Go to Setup in Focus and check the Job unique number. Then test if there is an issue with that job # i.e. 10020 by creating another user with the same job #. do a check out and see if issue repeats. 
2) If issue is reproduced...change the external schedule ID for that job to another i.e. 10022 and test. 

    • Related Articles

    • Micros Station not connected to network

      Issue#1: Term# not connecting to the network and showing inactive. Issue#2: Can't see the node in file utilities to connect via VNC. Steps taken to troubleshoot... 1) Check network cables. If cables are secure it helps sometimes to disconnect and ...

    • Work Station Frozen on Payment Screen

      Symptoms: Cashier was taking payment and (typically) after entering a cash payment screen goes gray and will not respond to user ISSUE:  Most likely the user tap/touched some part of screen away from were the "Change Due" screen pops up. This causes ...

    • CAP station lost connection with Server

      Issue: CAP POS throwing "cannot connect to the server" error. Solution: 1) Open task manager and close software. 2) open CMD and run ping command to server. If good ping signal return time. 3) Check if reconnecting the shared drive will restore. ...

    • SpotOn- Tip Adjustment Error

      Having Failed Tip Adjustments for delivery tickets. Error: status=0, code=000100, message=DECLINE, hostMessage=Modify Transaction Not Allowed 1) SpotOn states that this error indicates the batch has already been run. 2) customer should email the ...

    • QSR Site Did Not Poll- Create XLM file for re-polling

      FOR INITIAL SETUP ONLY: 1) Make sure you update the settings in create 2) Secondary Datafeed 3) Restaurant Magic 4) Interval =0 5) Backfill=0 6) Days to Save 30 CREATING THE XLM:  A) Create a file call manualupload, open with notepad and place the ...