Pipeline Settings in Cheftab with SpotOn Restaurant

Pipeline Settings in Cheftab with SpotOn Restaurant

To setup pipeline at a site several things need to be noted.

1- In the ChefTab controller #1 you need to go to Manager settinge> ChefTab Settings>Pipeline Settings. 
2- There are multiple settings, but we primarily would use send order when bumped.
3- In this option you will have to enter the IP address of the next KDS or Printer to receive the order. Right click out to main screen.
4- You will continue this until you reach the end of the pipeline.
5- In BOH under Kitchen Displays and Printers make sure that the "Requisition" setting "Consolidate Items" is turned on.
6- if this is not turned on the order will only go to the first KDS and will not be sent on after bumped.
When consolidate items is turned off it will brake the Pipeline settings. This is primarily due to that most of the KDS settings are controlled
from SpotOn Restaurant software, but the Pipeline settings are controlled from the ChefTab KDS controller.

    • Related Articles

    • SpotOn- Tip Adjustment Error

      Having Failed Tip Adjustments for delivery tickets. Error: status=0, code=000100, message=DECLINE, hostMessage=Modify Transaction Not Allowed 1) SpotOn states that this error indicates the batch has already been run. 2) customer should email the ...

    • Internet down. Meraki not taking over network. For SpotOn systems

      ISSUE: site lost network connection and Meraki failover is not taking over to provide service. Troubleshooting: #1 Solution- remove network feed from port one. If site modem is still sending enough signal to the Meraki even if it creates a system ...

    • TIP Adjustment for SpotOn Handhelds

      To turn on tip adjustment options for handheld. a) Payment Methods make sure payment type is "Tippable" is on for each order type and add the suggested tip percentages also for each order type. b) Order Types make sure "Allow Tips on Order Type" and ...

    • Handheld not completing transactions. Need a TSYS app reprovision

      ISSUE: getting "Transaction error: DUP TRANSACTION (100011)" Solution: 1) Attempt closing software and reopening. if no change. 2) Device reboot. if no change. 3) Call SpotOn to have them remove TSYS app and reloaded it. 4) While waiting for them to ...

    • QSR Site Did Not Poll- Create XLM file for re-polling

      FOR INITIAL SETUP ONLY: 1) Make sure you update the settings in create 2) Secondary Datafeed 3) Restaurant Magic 4) Interval =0 5) Backfill=0 6) Days to Save 30 CREATING THE XLM:  A) Create a file call manualupload, open with notepad and place the ...